Setup Video
-
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps:Step 1. Log in to the ControllerStep 2. Adopt DevicesStep 3. View Dashboard and MenusStep 4. Set up WANStep 5. Set up LAN and VLANsStep 6. Set up Wi-FiStep 7. Set up ACL
More Fold
-
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
More Fold
-
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
More Fold
-
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
More Fold
-
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
See AlsoER605 V2_2.2.2 Build 20231017 Official Firmware (Released on Oct 18th, 2023)[OpenWrt Wiki] TP-Link ER605 v2ER605 V2_2.1.4_Build 20230727 Beta Firmware For Trial (Released on Aug 2nd, 2023)Download for ER605 | TP-Link AustraliaMore Fold
-
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
More Fold
-
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
More Fold
-
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
More Fold
-
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
More Fold
-
How to Configure Bandwidth Control via Omada SDN Controller
This video will show you how to configure bandwidth control via Omada SDN Controller.
More Fold
Feature Filter: All Configuration GuideUser Application RequirementTroubleshootingQ&A of functional explanation or specification parametersWhen You Set UpFurther Assistance
FAQs
- How to set up Access Control of TP-Link Omada Router in Standalone and Controller 06-13-20241211
- How to Configure DHCP Server on Omada Gateway 06-13-2024480
- How do I configure WAN mode on the Omada Gateway 06-13-2024492
- How do I Upgrade Firmware of Omada Gateway in Standalone Mode? 06-04-20241088
- Client is unable to access the Internet for business router 06-03-20241764
- How to configure WAN IP Alias for Omada Gateway 06-03-20241959
- How to use Iperf to test the speed on TP-Link routers 04-29-2024161206
- How to connect to Omada Router using IKEv2 VPN of Android/iOS 04-22-202474145
- How to create multi networks and manage network behavior with ACL on Omada Gateway in standalone mode 03-13-202479617
- How to configure Omada Gateway as a PPTP/L2TP VPN Client to enable the VPN Server as Proxy Gateway for backend clients 01-03-20248748
- Why failing to achieve bandwidth aggregation of multiple WAN ports by Speedtest on SMB router 12-27-202353925
- How to setup your SafeStream router in standalone mode 12-27-202383931
- How to configure Link Backup on Dual WAN Router using the new GUI 12-27-2023209929
- How to configure Link Backup in Controller Mode 11-27-20239821
- 10-09-202315755
- How to use the Emergency Mode to recover the firmware for Omada Gateways 10-09-202351902
- 09-26-202313401
- How to implement unidirectional VLAN access through ACL configuration on the Omada Gateway in Controller mode 09-19-202314745
- How to Configure IPsec Failover on Omada Router in Standalone mode 07-26-202324638
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above) 04-23-202339534
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above) 04-23-202329519
- What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-202326564
- How to use the Ping tool in Omada APP 04-20-202329247
- How to Configure TP-Link Omada Gateway as OpenVPN Server onController Mode 04-14-202344125
- How to Configure TP-Link Omada Gateway as OpenVPN Server on Standalone Mode 04-14-202339355
- How to Configure TP-Link Omada Gateway as OpenVPN Client 04-14-202341959
- How to Configure TP-Link Omada Router with Starlink Internet 12-26-2022103746
- 09-09-2022111228
- How to add an Omada Gateway to the network?(Controller 4.3.5 or below) 08-01-2022108507
- How to add an Omada Gateway to the network? (Controller 4.4.3 or above) 07-20-202267107
- How to configure WOL (Wake On LAN) on TP-Link SafeStream Router using the new GUI 06-27-2022203217
- How to establish a PPTP Server by Omada Gateway in Standalone mode 06-27-202241225
- How to establish an L2TP Server by Omada Gateway in Standalone mode 06-27-202259161
- What to do if you want to access the Internet with the local gateway rather than the PPTP/L2TP VPN Server 06-27-202247379
- What to do if you cannot access the remote network through Client-to-LAN/Site VPN tunnel 06-27-202295604
- How to Set up Site-to-Site Manual IPsec VPN Tunnels on Omada Gateway in Controller Mode 06-27-202287772
- How to set up site-to-site Auto IPsec VPN Tunnels on Omada Gateway in Controller Mode 06-27-202273785
- How to manage Omada devices at different sites across Internet using Omada Controller 06-27-2022101899
- How to set up DHCP reservation for clients on Omada Gateway in Controller mode 06-24-202254952
- How to set up router on a stick with Omada gateway and L2 switch 06-24-202237031
- How to preconfigure WAN settings on Omada Controller (v5 or above) 06-24-202254179
- How to configure PPTP/L2TP/OpenVPN Client to access peer server through site-to-site VPN using business router 06-24-202275579
- The difference between Standalone mode and Controller mode of Business router 04-18-202248772
- The solution for the System Log data of ER7206/ER605 not passing through the IPsec VPN tunnel to syslog server 01-11-202236346
- What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021106997
- VLAN configurations of the LAN ports on Omada Gateway in Controller mode 08-23-202168848
- Why virtual server (port forwarding) feature is not working on your TP-Link Business router? 08-03-202185117
- Why can’t my Mac access the remote network after connecting to the VPN server of the Omada Gateway? 05-26-202184052
- How to check the link status and data traffic statistics of TP-Link Business Routers with SNMP 04-16-202161639
- Source code template for External Web Portal (Business Router) 03-15-202141165
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
More Fold
| ER605(UN)_V2.20_2.2.5 Build 20240522 | Download | |
|---|---|---|
| Published Date: 2024-06-14 | Language: English | File Size: 22.32 MB |
| Bug Fixed: Notes: | ||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Linkproducts for direct download and further information, including a list of TP-Linksoftware that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode.To use Omada, please update your device's firmware to the latest version.
